Optima TFprofi (SX)
Kverneland Optima TFprofi - high performance and precision
Pneumatic precision drill Optima TFprofi with trailed frame combines utmost precision, high performance and low pulling force.
Highlights
High speed - up to 18km/h Optimum depth control Effective ground contour Small coulter for precise seed placement 60 litres seed hopperDescription
The Kverneland Optima is the universal precision drill for different type of seeds, ready for mulch or conventional sowing. The trailed hydraulic folding frame in working width of 6m (6.4m) offers a perfect combination of most precise seed placement, high performance and reduced tractor power requirement starting at 90hp.
The Optima TFprofi is fitted with high speed SX rows.
With the Optima TFprofi SX, the optional fertiliser hopper of 2000l can easily be filled with a front loader, big bags or as an option by filling auger. Different fertiliser coulters are available.
The Optima TFprofi can be equipped with the PUDAMA system to increase the efficiency in the use of mineral starter fertiliser in row crops. With the targeted fertiliser application by PUDAMA, the amount and location of the nutrients are precisely defined to where the roots of the grains can reach them and only as much as needed.
The optional GEOFORCE ensures a consistent sowing depth and automatic pressure control – fully independent of row weight or varying soil conditions to optimize emergence and growth.
The combination with an iXtra LiFe allows the application of liquid fertiliser during seeding.
Features
GEOSEED - Precision at high end
GEOSEED is the precise synchronization of seed placement across the full working width of the machine. This ensures that seeds are distributed evenly, achieving an optimal pattern—either parallel or diamond-shaped—across the soil surface. The positive effects of this technology are far-reaching. By enhancing seed distribution, GEOSEED maximizes the efficient use of key resources such as nutrients, water, and sunlight, fostering optimal plant growth. Additionally, this uniform planting pattern helps reduce the risks of wind and water erosion, as the even distribution of plants improves soil structure and coverage, leading to better water retention and minimizing soil degradation.
Kverneland Sync – The Implement Gateway
Always Connected – Easy and Direct
With Kverneland Sync, your seeder is continuously connected to Kverneland’s online services. Designed for efficiency and ease, Kverneland Sync ensures seamless data transfer to IsoMatch FarmCentre and Kverneland ServiceCentre, optimizing your seeder's connectivity for better machine management.
Remote Service – Minimize Downtime
Kverneland Sync offers remote diagnostics, allowing technicians to quickly analyze and address electronic issues on your seeder from a distance via the Kverneland ServiceCentre. This feature helps to minimize downtime in the event of a breakdown. See how it works: Always connected
Task Management – Enhance Reporting and Transparency
Kverneland Sync provides all relevant data in IsoMatch FarmCentre, our integrated farm management platform, enabling real-time tracking, performance measurement, and secure data storage. This is especially useful for machine cooperatives, streamlining logistics and invoicing. Additionally, Kverneland Sync enables geofencing to help protect your seeder against theft, with an accumulator that allows you to locate your planter even when it’s not connected to a tractor.
With the pressurized seeding heart, the seeds are “shot” by an airstream of up to 70kph into the furrow. A smooth, flexible intermediate press wheel catches and protects the delicate seeds. Any negative impact such as vibration on the way between release point and soil contact are eliminated due to the high air stream.
The seeds reach their perfect position in the soil. Each sowing row is electrically powered by ISOBUS connection. An additional generator or other power sources are not required. The complete power supply and control is via ISOBUS.
e-drive II – complete control and monitoring of the machine from the tractor cab in accordance with ISOBUS standard
- With e-drive II, each sowing unit is driven individually via an electric motor.
- The low-maintenance drive is connected directly to the seeding heart via a toothed belt in an encapsulated dust proof housing.
- This enable an extremely compact design and smooth drive characteristics with low current consumption
- All the data is entered and read out via an ISOBUS terminal like IsoMatch Tellus PRO or Tellus GO+.
- The sowing distances are infinitely adjustable and can be changed during sowing.
- All the sowing units can be switched off individually.
- In conjunction with “close row” sowing widths of 37.5cm a further benefit of the e-drive II comes into play: Individual tramline switching. Tramlines can be set up for any spray width.
- The e-drive II features complete electronic monitoring of all machine functions including seed monitoring via an opto sensor.
IsoMatch GEOCONTROL - Cost saving with immediate payback
Seeding with GPS and GEOCONTROL in combination with an electric driven precision drill is a major step towards precision and cost saving. These machines are all equipped with ISOBUS technology which with the help of the IsoMatch Tellus terminal, can be easily controlled.
Each electric driven seeding element, in combination with GPS and GEOCONTROL, is automatically switched on or off in exactly the right place, ensuring there is no overlap with any row that has already been seeded. This is especially handy in triangular fields, on curved or irregular shaped headlands.
Micro-drill for Optima HD-II and SX sowing units
The demand for microgranule applicators is increasing. Micro nutrients and also small amounts of insecticides or fungicides ensure the best start of the crop.
The electric driven micro-drills for the Optima HD-II and SX sowing units have been designed as backpack behind the sowing units and offer a hopper capacity of 17 liters.
They are electrically driven and ISOBUS controlled. The metering device consists of a wear-resistant plastic housing with exchangeable cell wheels made of stainless steel. This ensures the precise metering of the micro granules.
Operator’s safety
The engineers had focus on highest level of operator’s safety by offering easy and safe handling of the applicator. Therefore, the operator can exchange the cell wheels even when the hoppers are full of micro granule. There is no need to empty them first, reducing the operator’s risk of getting in direct contact with the granules.
A plus for the environment
The micro granules fall freely into the seed furrow without any air support, minimising the emission of dust. Therefore, the new micro-drill fully complies with the current guidelines for emission control of any granules applied.
Precision Farming
The comfortable, fully ISOBUS integrated control system allows the adaption to the stop and starting points of the seed row. This ensures precise shutting on and off at the end of the field and in tramlines (without overlaps or faults).
Precision Farming
When deciding what equipment to purchase, it is not always easy to find the optimal solution in the broad market offering of today. Technology is developing fast and tractors and implements are more and more equipped with high tech electronics. We understand this complexity and are committed to provide you with easy farming solutions. Therefore these cost-efficient ISOBUS Universal Terminals, IsoMatch Tellus PRO and IsoMatch Tellus GO+ are made for easy machine control and efficient farming.
With its advanced hardware and software features, the IsoMatch Tellus PRO provides the optimal precision farming solution for an all-in-one control system inside your tractor cab.
IsoMatch Tellus PRO is the centre for connecting all ISOBUS machines and a platform for running precision farming applications. It offers everything a farmer needs to get the maximum out of his machines and crops, as well as cost savings in fertiliser, chemicals and seeds by using automatic section control and variable rate control. With the unique dual screen functionality it gives the farmer the opportunity to view and control two machines and processes simultaneously.
Work easy. Be in control.
IsoMatch Tellus GO+ is especially developed for controlling the machine in a simple way. The farmer is in full control of the machine in exactly the way he wants. Easy set up the machine with the soft keys via the 7-inch touch screen. And, optimal control while driving, just use the hard keys and rotary switch. Controlling the implement has never been so easy.
This can be you your first step into Precision Farming
IsoMatch Tellus GO+ makes it easy to control any ISOBUS machine from your tractor cab. IsoMatch GEOCONTROL enables you to achieve higher yields, lower costs and do your work with less hassle. This licence key is divided in two parts, Section Control and Variable Rate Control, which are available from the IsoMatch Shop. Now you can buy the specific functionality that you need.
Made for smart, efficient and easy farming
IsoMatch GEOCONTROL is an advanced software application within the IsoMatch Tellus PRO and IsoMatch Tellus GO+ that helps you to control all ISOBUS compatible Kverneland Group machines such as sprayers, spreaders and seeders! Combined with a GPS receiver it fulfils the future needs in terms of easy, smart and efficient farming!
GEOSEED increases the yields of row crops and ensures maximum efficiency. Seeds are placed perfectly in line and in relation to each other.
GEOSEED is offered in two different levels:
GEOSEED Level 1 is the synchronization in the machines working width. This improves the distribution of seeds up to perfection in parallel or diamond pattern: Positive effects are the best use of nutrients, water and sun. Also the wind and water erosion is decreased.
GEOSEED Level 2 is the synchronization in the whole field. This is the necessary requirement for interrow cultivation, also across the seeding direction. GEOSEED is the only system in the world, that makes this mechanic weeds control possible!
Technical specifications
Technical specifications
Download brochure| Model | Optima TFprofi (SX) | |
|---|---|---|
| Frame type | trailed fold | |
| Working width (m) | 6.00 | |
| No. of SX sowing rows | 8 | |
| Row width SX row (cm) | 70 - 80 | |
| Transport width (m) | 3.00 1) | |
| e-drive II, ready for GEOSEED® | Standard | |
| Fan drive 1000rpm | Option | |
| Fan drive 800rpm | Standard | |
| Hydraulic fan drive | Option | |
| Linkage | CAT 3N Cross shaft 3) | |
| Tires 12.5/80-18 2) | Standard | |
| Hydraulically operated track marker | Standard | |
| Mounted fertiliser spreader | Option | |
| Maximum no. of rows with mounted fertiliser spreader | 8 | |
| Mechanical drive of fertiliser spreader | Standard | |
| Electro-hydraulic drive of fertiliser spreader | Option | |
| Fertiliser hopper capacity in litres | 2000 | |
| Filling auger | Option | |
| Weigh cells | Option | |
| Micro granule applicator micro-drill | Option | |
| PUDAMA | Option | |
| GEOFORCE | Option |
1) 3.00 with 70/75 cm row width; 3.40m with 80cm row width
2) N° of tires: 2 wheels standard, 4 wheels optional
3) Optional Cat. II / CAT. III with cross shaft, 40mm Ringe eye and K80 pulling eye
Technical specifications
Technical specifications
Download brochureOptima SX seeding row |
|
Hopper capacity (liter) |
60 |
V-press wheel 25mm |
• |
V-press wheel 50mm |
º |
Electronic drive e-drive II |
• |
Rape Kit |
º |
Max. driving (km/h) |
18 |
Min. row width (cm) |
40 |
Weight (kg) |
129 |
1) 3.00 with 70/75 cm row width; 3.40m with 80cm row width
2) N° of tires: 2 wheels standard, 4 wheels optional
3) Optional Cat. II / CAT. III with cross shaft, 40mm Ringe eye and K80 pulling eye