Kverneland iXter A

• Fully Integrated Concept

It is easy to operate the iXter A sprayer with the control panel, chemical inductor, hand wash tank and clean cloth locker all on the same side of the sprayer. Nobody would expect all these functions so easily to hand. Better protection and integration is simply not possible.

• Optimal Weight Balance

The gravity point is close to the tractor for a maximum weight transfer. Still there is enough space to connect the PTO shaft and the hydraulic and electric cables.

• Control Panel

The control panel makes life easy by its intuitive operation. The controls are separated to a suction and a pressure side. The control panel is located at the left side of the sprayer.

• Easy Operation

The graduated chemical inductor with a capacity of 30 litres is mounted on a pivoting point and fully integrated in the frame. The rotating canister cleaning nozzle releases the water when pushed downwards. The circular rinsing system is no add on: it is part of the design! The sprayer can be cleaned in the field with water from the clean water tank. An outside cleaning set is optional available. Everything is also available to keep your hands clean. Easy access to fill the tank via the opening in the cover. You can wash your hands via the hand wash tap. External aspirated water is filtered first by the filter on the hose and then by the suction filter. In parallel you can already use the chemical inductor to add and premix chemicals. 

FlowMate Control FMC: Basic Spray Computer

• Extremely simple to operate
• Very compact by integration of all spraying and hydraulic functions
• Integrated nozzle advice
• Field memory for 25 different fields

iXspray

The iXter B mounted sprayer is 100% ISOBUS compatible as standard, which means easy plug and play with the IsoMatch Tellus GO+ or PRO or any other AEF certified terminal. The innovative iXspray hardware and software with intuitive touch interface guarantees an user friendly operation of the sprayer. iXspray is full of nice features to make the operators life easy, save time and avoid mistakes in a busy working season, for example pre-sets for spray jobs and boom configuration can be configured easily.

• ENviromental FOcus (ENFO)

ENFO priming and rinsing is standard on all our spray computers. This smart technology optimizes filling and cleaning of the spray lines. Accurate application, no waste of chemicals and saving water are the benefits for you and your environment. 

• Rotating level indicator

A rotating level indicator provides the actual tank volume.

• Starguide IV

Those who have used it will never go back. Starguide IV will change your spraying days forever: spray around the headland and the Starguide IV will control the spray sections automatically as you can cover the remainder of the field.

• Parking frame

A parking frame is available for easy hitching and storage of the sprayer.

• Filling

The optional 2 inch hydrant filling device allows filling under pressure at high capacity. A GEKA adapter for 1 inch filling is optional available. For external filling a 1.5 inch suction hose is optional available. If 2 inch filling is required a camlock adapter can be ordered.