Kverneland PW - RW

Efficient, flexible, easy to operate

"3 ploughs in 1" for high capacity ploughing

In-Furrow & On-Land

7 - 12 furrows

Efficient, flexible, easy to operate

The well proven Kverneland PW/RW “3 in 1 concept" consists of a robust semi-mounted plough in the front and a standard EG or LB mounted reversible plough at the rear.
Depending on weather and soil conditions, either use the whole wagon plough or only the front or the rear plough. 

The advantages:

  • robust design + Kverneland unique steels and heat treatment technology !
  • quality ploughing thanks to the 3 point linkage of the center section. It follows the ground at all times.
  • easy and safe to adjust and to operate (ATS, Isobus, manual management with the addition of a valve controller or manual management via tractor control)
  • unrivalled Auto-reset system for PW for non-stop ploughing. No maintenance. Shearbolt protection for RW
  • Variomat Vari-width® for On the Move or manual furrow width adjustments
  • "In Furrow" and/or "On Land" 
  • stable and safe while turning and in transport
  • Packomat compatible
  • wide range of accessories
  • 7 to 12 furrows 

Technical Specifications:

Models (Stepwise) Interbody clearance cm Underbeam clearance cm Furrow width cm No of furrows
PW 100 70/75 35 - 50 7 - 12
RW 100 70/80 35 - 50 7 - 12

 

Models (Vari-width®) Interbody clearance cm Underbeam clearance cm Furrow width cm No of furrows
PW 100 70/75 35 - 50  7 - 12
PW 115 70/75 35 - 50 7 - 10
RW 100 70/80 35 - 50 7 - 12
RW 115 70/80 35 - 50 7 - 10
Highlights

Unique frame robustness PW / RW

Importance of heat treatment

  • The frame is an essential part of the plough construction. For Kverneland quality standards, a non heat treated part is a weak part!
  • Kverneland frames are heat treated by induction twice. The temperature transfer to the steel is closely monitored. The frame gains 3 times as much strength. This unique Kverneland induction processes provides robustness and flexibility while ensuring an outstanding durability.

Stronger but not heavier

  • For the equivalent Kverneland robustness, competitors would use more steel in thickness or in dimensions, therefore producing a heavier frame.
  • Heavier frame impacts negatively pulling forces, wearing of parts, lifting capacities, tractor life time, and fuel consumption.

Long lasting

  • Weldings are also a critical weakness for a plough frame. Kverneland frames are supplied as one sole part, no welding!

Frame availability

  • 120 x 200 mm 7-9 furrows
  • 200 x 200 mm 10 and12 furrows
  • 200 x 250 mm 12 and 14 furrows
     
  • The “tail” of the plough is either a 200 or a 300 head stock EG/LB plough

Vari-Width® (Variomat) System

Stepless Vari-width® system for infinite adjustments of working width, from 30 to 50 cm (12 to 20”) depending on models. Kverneland’s world patented system is available either with hydraulic or mechanical furrow adjustments.

Benefits:

  • Easy variation of ploughing capacity
  • Perfect match at all time between tractor capacity, implement and soil conditions
  • Time saving: up to 30% more capacity
  • Cost saving: up to 18% reduction in fuel consumption in relation with increased ploughing capacity
  • Better work: plough up to the hedges, fences, trees and ditches
  • Minimum wear: unique non-wearing linkage joint between the beams and the mainframe section
  • Perfect line of pull at all time. Kverneland’s Vari-width offers the correct parallel linkage along the whole plough. Therefore, lower draft requirement, minimum wear and tear.

 

Plough Bodies

Excellent Ploughing Quality

They are renowned all over the world for their:

  • excellent ploughing quality
  • outstanding wear resistance
  • low draft requirements

Bodies of a unique steel.

Kverneland Technology: 12 hours carburising heat treatment process for:

  • optimum wear resistance (sharp as a diamond)
  • the necessary flexibility to absorb impacts

Body No. 8 – “Universal body”
for light to heavy soils
good trash burial
easy pulling
Depth: 15 to 30 cm (6 to 12”)
Width: 30 to 55 cm (12 to 22”)

Body No. 9 – “Deep Universal body” 
for heavier soils and deeper ploughing
well turned and packed furrows
easy pulling
Depth: 15 to 35 cm (6 to 14”)
Width: 30 to 55 cm (12 to 22”)

Body No. 14 – “Stickless body”
plastic Body
for sticky and non-abrasive soils, without stones
good crumbling
wide furrow bottom
longer life-time in non-abrasive soils
Depth: 15 to 35 cm (6 to 14”)
Width: 30 to 55 cm (12 to 22”)

Body No. 28 – “Wide tyre body”
suits all soils; even heavier soils than body 8
very wide empty furrow for tractor wheels up to 710 mm
good turning and well packed
easy pulling
suitable for Depth: 15 to 30 cm ( 6 to 12”)
Width: 30 to 55 cm (12 to 22”)
 
Body No. 30 – “Finger body”
for sticky-stony soil and abrasive soils
good work in heavier soils
best crumbling effect
wide furrow bottom,
Depth: 20 to 35 cm (8 to 14”)
Width: 30 to 55 cm (12 to 22”)

Body No. 34 – Plastic mouldboard
Long and slim shape (similar to body 28)
For soils with high humus content without stones
Advised for tactors with large tyres
Easy pulling
Working depth: 12-5cm
Working width: 30-55cm
Landside / mouldboard: 40 degree

Auto-reset

Unbeatable in stony conditions !

Kvernelands fully automatic non-stop Auto-Reset System is unbeatable when it comes to trouble-free ploughing in stony conditions. The clever multi-leaf spring system allows the plough legs to release over stones and other solid objects in a smooth and efficient manner. This avoids sudden jolts and possible damage. Once the obstruction is passed, the plough body automatically returns to the correct ploughing depth.

Safety compliance

With today's demands for higher output, both tractor and plough are expected to perform quicker than ever. This makes more arduous demands on the equipment, particularly on the safety systems designed to protect tractors, ploughs and drivers against the dangers encountered whenever the plough meets hidden obstructions in the ground. The Kverneland Auto-Reset system guaranties this safety high standars requirements.

Adaptable to varying soil conditions

Depending of the type of soil all Kverneland ploughs can be equipped with different leaf springs packages. For soft soils, a normal spring with 5 leaves is the best choice to obtain the perfect ploughing in stony conditions. Today, most Kverneland ploughs are delivered with the Heavy Duty springs package (HD) with 7 leaves. This will perform well in most conditions. If the soil is very hard and stony - a double leaf spring package is recommended.

Extra leaves when needed

The standard Auto-Reset system includes 7 Kverneland heat treated springs (640Kp).
For heavier to extreme soil conditions, extra leaf springs are added for up to 1400kp.
The leaves are easily fixed with one central bolt only.

Individual body release !

The Kverneland mechanical Auto-Reset system enables very plough body to release independently. A quality ploughing is therefore guaranteed. 

Minimum wear and high second hand value

Kverneland's Auto-Reset System is a quite simple construction that withstands the punishing forces year in, year out, with a minimum of maintenance. Save time and money !
Moreover, the Kverneland auto-reset system guarantees a longer life to the plough. When hitting an obstacle, the pressure on the point, frame, plough parts, decreases. The stress on Kverneland ploughs is therefore reduced. Consequently, second hand Kverneland ploughs  sell at  a higher value than competitors ploughs.
*by using an Hydraulic system, pressure would increase

Heat Treatment

Kverneland Heat Treatment Technology:

  • more than 130 years of experience
  • steels that withstand the toughest of conditions
  • best robustness/weight ratio on the market
  • for equivalent robustness, competitors would add more steel and therefore more weight, quicker wear, dissappointing ploughing results

Kverneland Steels:

  • Benefits from less weight:
    easier to pull/lower fuel consumption/lower lift requirement/reduced wear and stress for the tractor/more economical …
  • Benefits from more resistance:
    minimum breakage/less maintenance/lower rotation for wearing parts/time saving/highest 2nd hand plough value/longer life for the plough/more economical…

Problems always happen when the plough is being used, when the work must be done!

A Kverneland plough is a peace mind!

More info: Kverneland Technology

iM FARMING

Smart efficient easy farming

ISOBUS

When deciding what equipment to purchase, it is not always easy to find the optimal solution in the broad market offering of today. Technology is developing fast and tractors and implements are more and more equipped with high tech electronics. We understand this complexity and are committed to provide you with easy farming solutions. Therefore these cost-efficient ISOBUS Universal Terminals, IsoMatch Tellus and IsoMatch Tellus GO are made for easy machine control and efficient farming.

More about ISOBUS Universal Terminals >

IM_isomatch-tellus_0023

IsoMatch Tellus

One terminal to control all ISOBUS machines

Using ISOBUS as the interface, the IsoMatch Tellus can communicate with all ISOBUS machines and is equipped to drive with GPS systems.
The easy-to-use touch screen is designed for long working days. You have an excellent view of the two screens, which allows you to follow the performance of both the implement and the tractor.

More about IsoMatch Tellus >

Isomatch tellus plough

IsoMatch Tellus GO

Work easy. Be in control.

Tellus GO is especially developed for controlling the machine in a simple way. The farmer is in full control of the machine in exactly the way he wants. Easy set up the machine with the soft keys via the 7-inch touch screen. And, optimal control while driving, just use the hard keys and rotary switch. Controlling the implement has never been so easy.

This can be you your first step into Precision Farming
IsoMatch Tellus GO makes it easy to control any ISOBUS machine from your tractor cab. IsoMatch GEOcontrol enables you to achieve higher yields, lower costs and do your work with less hassle. This licence key is divided in two parts, Section Control and Variable Rate Control, which are  available from the IsoMatch Shop. Now you can buy the specific functionality that you need.

More about IsoMatch Tellus GO >

IsoMatch Wireless

Connect to a local wireless network on your IsoMatch Tellus.

IsoMatch Wireless (USB-stick) is complementary to the IsoMatch Tellus and makes it easy to connect to a local wireless network, such as your phone’s hot-spot, home network etc.
No additional costs of an internet service provider. When connected via the IsoMatch Wireless you can browse the internet, view the weather, Gmail, Google, etc.

More about IsoMatch Wireless >

IsoMatchWireless_new

IsoMatch Eye

The IsoMatch Eye is the camera option in the IsoMatch product range.

IsoMatch Eye is a camera that has been developed for use with our sophisticated IsoMatch Tellus and IsoMatch Tellus GO dual screen terminal. The IsoMatch Eye is switchable from rear view to standard view.
It gives you full control and overview of entire machine operation during day and night, because of its night vision by integrated LED’s. This increases the safety e.g. when reversing the machine or manoeuvring around obstructions.

SMART
Changeable from rear view to standard view

EFFICIENT
Full control and overview of entire machine operation

EASY
Night vision by integrated LED’s

IsoMatch-Eye_500

IsoMatch TopService

Quicker support in finding a fault in Kverneland Group machines

IsoMatch TopService is the new service tool software which replaces the “FlashCan” software. The tool includes significant improvements of user interface and functionality in addition to new advanced features.

More about IsoMatch TopService GO >

IsoMatch Simulator

Learn about precision farming with e-learning

The IsoMatch Simulator is a virtual training program and the perfect tool to learn more about ISOBUS and precision farming. It is available for free and downloadable for laptops and personal computers. It simulates the full functions of the IsoMatch Tellus, IsoMatch Tellus GO and ISOBUS machines.

More about IsoMatch Simulator >

IsoMatch_Simulator_plough

IsoMatch InDemo

Our compact solution to demonstrate the compatibility of ISOBUS machines wherever you are

ISOBUS is all about compatibility. Whether you would like to show a customer your machines' compatibility to their ISOBUS tractor or demonstrate functionality on the IsoMatch Tellus, the IsoMatch InDemo is the perfect solution. The IsoMatch InDemo has won a silver medal of innovation at Agritechnica 2013.

Just plug and play
Plug the IsoMatch InDemo plug into the tractor's ISOBUS connector and you are ready. Every IsoMatch InDemo plug is programmed with a particular machine software. The virtual terminal functions as if the plug was a real machine. This compact solution is applicable to any ISOBUS tractor type.

More about IsoMatch InDemo >

IsoMatch MultiEye

IsoMatch MultiEye is an accessory for connecting multiple cameras to the IsoMatch Universal Terminal.

With the IsoMatch MultiEye you can connect multiple cameras to the IsoMatch Tellus or IsoMatch Tellus GO Terminal. You can easily switch between the cameras without the need for an additional screen in you tractor cabin. It gives you full control and overview of the entire machine operation during day and night, because of its night vision by integrated LED’s. This increases the safety when reversing the machine or manoeuvring around obstructions.

SMART
You can connect up to four IsoMatch Eye cameras and easily switch between the cameras with the remote control box which is standard included.

EFFICIENT
Full control and overview of entire machine operation from every side you want.

EASY
Night vision by integrated LED’s which increases the safety when reversing the machine or manoeuvring around obstructions.