Kverneland 6250
Chain and roller fixed chamber balers with a bale diameter of 1.20 x 1.25m.
The new Kverneland 6250 fixed chamber balers are designed for maximum flexibility in all crop conditions. Perfectly shaped bales, combined with long lasting reliable performance ensure that the new Kverneland 6250 series will be a profitable investment.
The combined bale chamber concept, with roller at front and chain and slat at the rear is the ideal combination for dense and well-shaped bales in all conditions. The system ensures maximal bale rotation in all types of wet or dry crops.
The Advantages:
- 2.0 and 2.2m pick-up with small diameter pick-up reel for fast and efficient throughput.
- Fork feeder, rotor intake or 14 knives cutting device.
- Drop Floor for easy unblocking.
- RotaMaX bale chamber concept with rollers and chain and slat.
- Easy and simple loading of net roll.
- New simple and intuitive control with the Focus 3 terminal
Technical Specifications
| Bale Diameter | Intake System | Binding | |
| 6250 F | 1.20 x 1.25m | Fork Feeder | Net and double Binding |
| 6250 R | 1.20 x 1.25m | SuperFeed | Net and double Binding |
| 6250 SuperCut-14 | 1.20 x 1.25m | SuperCut-14 | Net and double Binding |
The RotaMaX Chamber
- The Kverneland 6250 offers a bale chamber designed with 6 rollers at the front and chain and slat at the rear part.
- The combined solution gives excellent crop handling in all conditions with consistent, high density bales in both wet and dry material.
- The chains and slat of the rear section give an early and 100% regular bale rotation and hence faster bale formation leading to denser core of the bale. Even in very dry crops.
- The heavy duty rollers of the front section ensure a well-shaped bale finish and very tight bales.
- The chains in the rear section results in less crop loss compared to a full-roller concept.
- The tail gate has a completely enclosed design to reduce crop loss to a minimum, especially when operating in silage.
Parallelogram DropFloor system for easy unblocking
- Kverneland Drop Floor enables the operator to clear blockages easily from the tractor cab without any crop loss.
- Drop the floor to free the rotor of blockage, engage the PTO to feed the blockage through and close the floor to continue baling
Superior Intake Performance
SuperCut-25
- The SuperCut-25 pre-chopping system offers the ultimate solution for short chop baling with a chop length of 40mm. The short and precise chop provides dense and airtight bales for the best possible silage quality.
- The operator can choose to engage 25, 13, 12, 6 or 0 knives, giving maximum flexibility of operation.
- The SuperCut- 25 knives are fitted with dual action protection against foreign objects. Each knife is individually spring protected and can move in two directions.
SuperCut-14
- The SuperCut-14 knife chopping system provides a fast and efficient flow into the baler. With a chopping length of 70 mm it is the ideal solution for producing tight bales with superb silage quality.
- Each individual knife is spring protected against foreign obstacles. The knife will immediately return to working position once the obstacle has passed.
SuperFeed Rotor Intake for Ultimate Capacity
Truly impressive intake capacity can be achieved with the SuperFeed rotor intake system - handling all crop types with ease, whatever the conditions.
Single or Dual Fork Feeder
- The fork feeder versions are fitted with a cost efficient fork feeder intake system. This system provides direct feed into the bale chamber, and the wide opening allows almost unrestricted intake capacity for fast and efficient bale start.
- In addition the fork feeder gives less vibration and reduced power consumption.
- Dual fork feeder with double feed tines ensures even higher capacity, while still safeguarding fragile crop types.
Focus 3 Control Terminal
Kverneland Group Mechatronics has recently launched a new operator terminal, the Focus 3. This terminal is developed for specific implement types and will only be delivered as package for those implements, together with the electronics for balers. The terminal Focus 3 is positioned in the market as an economy solution.
- The Focus 3 terminal is easy to learn and very intuitive, with control terminal with focus on functionality and operating simplicity.
- The Focus 3 terminal is a universal control terminal which can also be used with other implements from the Kverneland Group.
- The Focus 3 terminal gives you full control of all functions from the tractor cab. They are shown on a large, clear digital display.
- The Focus 3 terminal monitors and controls all necessary functions with all relevant parameters are visible at a glance.The control box is also driving the binding automatically without any intervention from the operator.
PowerBind Twine and Net wrapping Systems
Easy Loading
- The very low loading height and the very easy threading of the system mean minimum downtime and maximum time baling. Storage for three rolls of net means you don’t have to worry about running out of net when the pressure is really on during long working days.
Twine Tying
- Automatic twine tying with the fast acting double tube system means simultaneous binding of both edges of the bale, keeping binding time to a minimum. Over crossing of twines in the centre of the bale provides no loose ends at the end of the binding cycle.
- The system is fully user programmable to make sure you make the best looking bales in all crop conditions.
New PowerBind Net Wrap
- The New Fix chamber baler is equipped with the patented new PowerBind net wrap system. PowerBind provides positive and reliable injection of net in all crop conditions, while also eliminating potentially troublesome feed rollers.Additionally the PowerBind provides one of the fastest net wrap actions available. This means minimum downtime and maximum time baling
- Net is fed right to the outside of the bale, with a specially widened entry channel, which also allows extra wide net types to be utilized if required.
- The simple net wrap system allows the net to extend past the edge of the bale. The 1.30m net is wider than the baling chamber, so that the net can be pulled over the edge of the 1.20m bale. The result is consistent perfectly shaped and tightly secured bales
iM FARMING
Smart efficient easy farming
IsoMatch Tellus
One terminal to control all ISOBUS machines
Using ISOBUS as the interface, the IsoMatch Tellus can communicate with all ISOBUS machines and is equipped to drive with GPS systems.
The easy-to-use touch screen is designed for long working days. You have an excellent view of the two screens, which allows you to follow the performance of both the implement and the tractor.
IsoMatch Tellus GO
Work easy. Be in control.
Tellus GO is especially developed for controlling the machine in a simple way. The farmer is in full control of the machine in exactly the way he wants. Easy set up the machine with the soft keys via the 7-inch touch screen. And, optimal control while driving, just use the hard keys and rotary switch. Controlling the implement has never been so easy.
This can be you your first step into Precision Farming
IsoMatch Tellus GO makes it easy to control any ISOBUS machine from your tractor cab. IsoMatch GEOCONTROL enables you to achieve higher yields, lower costs and do your work with less hassle. This licence key is divided in two parts, Section Control and Variable Rate Control, which are available from the IsoMatch Shop. Now you can buy the specific functionality that you need.
IsoMatch InDemo
Our compact solution to demonstrate the compatibility of ISOBUS machines wherever you are
ISOBUS is all about compatibility. Whether you would like to show a customer your machines' compatibility to their ISOBUS tractor or demonstrate functionality on the IsoMatch Tellus, the IsoMatch InDemo is the perfect solution. The IsoMatch InDemo has won a silver medal of innovation at Agritechnica 2013.
Just plug and play
Plug the IsoMatch InDemo plug into the tractor's ISOBUS connector and you are ready. Every IsoMatch InDemo plug is programmed with a particular machine software. The virtual terminal functions as if the plug was a real machine. This compact solution is applicable to any ISOBUS tractor type.
