Kverneland cultivator Turbo

Kverneland  re-introduces the trailed cultivator Kverneland Turbo in working width of 6.5m and 8m.

The Kverneland Turbo has been designed with 5 rows of tines for all kind of soil cultivation: stubble cultivation after harvesting from 3cm to 15cm, seedbed preparation after ploughing and also shallow working in spring or  2nd stubble cultivation after manure/slurry and  after green fertiliser crops.

 The Advantages

  • Under beam clearance of 700mm and long distance between rows from 510 to 900mm for a perfect soil flow without blockages
  • Extremely flexible S-tine for intensive mixing and stubbling action
  • Low pulling requirement (6,5m–200 hp/8m–300 hp)
  • Stubble cultivation and loosening from 3 to 15cm deep
  • Easy operations with all hydraulic adjustments
Models Turbo 6500T Turbo 8000T
Number of tines 33 41
Working width (m) 6.18 7.68
Roller width (m) 6.50 8.00
Number of tine rows 5 5
Transport width (m) 3.00 3.00
Row spacing (mm) from 510mm to 900mm
Frame box section (mm) 100 x 100
Linkage Cat III & IV
Underbeam clearance (mm) 700
Regular tine spacing (mm) 19
Transport wheels 2 wheels 500/60 x 22,5
Depth wheels 4 wheels 340 / 55 x 16
Min/Max HP 200/350 240/450
Total weight with Actiflex / Actipack (kg) 6600/7100 7200/7700
KV_turbo_0012
Video
Animation
Kverneland cultivator Turbo
Kverneland cultivator Turbo
Kverneland cultivator Turbo
Kverneland cultivator Turbo
Kverneland cultivator Turbo
Kverneland cultivator Turbo
Kverneland cultivator Turbo
Kverneland cultivator Turbo


Turbo - three working zones

The Kverneland Turbo has 5 rows of tines to avoid any blockages in case of high residues such as sunflower, oil seed rape, maize, etc… The long distance between the tine rows varies between 510 and 900mm to get the optimum soil flow around the wheels.

The tines are followed by levelling tines to close the furrow made by the last rows of S-tines.

The Kverneland Turbo is available with a choice of active rollers such as Actipack 560mm, Actiflex 580mm or Actiring 540mm.

KV_turbo_0003

Turbo - The tines

The S-tine benefits from a strong vibration effect: the large coil and the high tine clearance of 700mm ensures robust flexibility whilst ensuring a powerful vibration for cracking the clods.

The narrow tine spacing is made for an active crumbling and even levelling. In addition, the pressure applied to the coil is reduced extending durability.

The tine can be equipped with 2 different shares:

 - 55x15mm for deep cultivation, low disturbance, and low fuel consumption. It is mostly used to open the soil in spring time.

- Double heart share 125mm (reversible) for intensive mixing.

Turbo_Tines

Turbo - Strong and robust frame

The frame has been performed by FEM (Finite Element Method) calculation to comply with the highest lateral and longitudinal forces. It has been designed for tractors up to 450 hp but also to be equipped with the heaviest roller like the Actipack roller.

FEM calculation

Turbo - Levelling equipment

To reach a perfect levelled surface, the Turbo has levelling tines to bury the furrow made by the last row of tines. The angle can be adjusted at any time according to the working depth.

Levelling equipment

Turbo - Rear accessories

There is a full range of levelling equipment and rear rollers available:

Cage roller ø 550mm - 90 kg/m

  • 10 bars for a good loading  capacity and operation in wet conditions
  • Effective crumbling action

Double cage roller ø 400mm (tube/flat) - 160 kg/m

  • Good crumbling
  • Precise depth control

Actipack ø 560mm - 220 kg/m

  • The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils and also in wet, stony and sticky conditions thanks to the independent skids and knives.
  • The cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breakdown and fine seedbed preparation.

Actiring ø 540mm - 160 kg/m

  • The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system.
  • The discs have been replaced by a “V” profile ring, this is saving 60kg/m, which is of critical importance for reducing lifting requirements for mounted equipment.
  • Actiring is not recommended in stony conditions.

Actiflex roller ø 580mm - 160 kg/m

  • The Actiflex roller has been made to create an intensive mixing with all types of conditions, even stony ones.
  • The rings are made with spring steel to have a high resistance against stress at high speed.
  • Actiflex rings are separated by skids to prevent any accumulation inside the roller.
  • This roller is the ideal tool to create a nice seedbed and enhance the weeds regrowth after harvesting.
KV_rear roller_0005.jpg
Actiflex roller
Actiflex roller
Actiflex roller
Actiring roller
Actiring roller
Actiring roller
Cage roller
Cage roller
Cage roller
Double cage roller
Double cage roller
Double cage roller

Turbo - Depth control and weight transfer

4 front wheels and the rear roller ensure a perfect depth control of the machine whatever the soil profile is. In this way, the machine is able to work with an accurate working depth from 3 to 15 cm.

The conception of the frame and the position of the wheels have been designed to ensure a constantly positive load on the drawbar. So even when turning on the headland and reversing with the machine, there is a positive weight on the drawbar.

Depth control

Turbo - Safe transport

For safe transport, the Turbo can be equipped with hydraulic or pneumatic brakes. The transport width does not exceed 3m even with the wider version of 8m. Homologation at 40km/h are in process for Germany.

KV_turbo_0011