Kverneland 9580 C - 9584 C - 9590 C Hydro

Heavy Duty Centre Swath Rakes

The Kverneland 9580 C, 9584 C and 9590 C Hydro are heavy duty two-rotor rakes with working widths up to 8.0, 8.4 and 9.0m respectively. They are designed for the toughest conditions and feature a high performance oil-bath gearbox and a strong carrier frame. The hydraulically adjustable working and swath width and ability to make sharp turns of up to 80° are important features of these rakes.

Due to the Hydro axle Kverneland 9590 C Hydro has a transport height of less than 4.0m, even without detaching the tine arms.

The Kerneland 9580 C with newly designed wheel axles provide a transport width below 4m, even with tine arms mounted.

The Advantages:

  • Working widths of 8.0, 8.4 and 9.0m.
  • ProLine oilbath gearbox.
  • TerraLink Quattro for perfect ground followings.
  • Hydraulically adjustable working width.
  • Active wheel steering with 80° turning angle for easy manoeuvrability.

Technical Specifications:

  Working Width Tine Arms Weight
9580 C 7.00 - 8.00m 2x12 2065kg
9584 C 7.60 - 8.40m 2x12 1950kg
9590 C Hydro 8.00 - 9.00m 2x14 2310kg
KV 9590C Hydro 013
Video
Animation
Kverneland 9580 C
Kverneland 9580 C
Kverneland 9580 C
Kverneland 9580 C, below 4m transport heigjht
Kverneland 9580 C, below 4m transport heigjht
Kverneland 9580 C, below 4m transport heigjht
Kverneland 9584 C
Kverneland 9584 C
Kverneland 9584 C
Kverneland 9590 C Hydro, transport height below 4m
Kverneland 9590 C Hydro, transport height below 4m
Kverneland 9590 C Hydro, transport height below 4m


ProLine Gearbox

  • The ProLine rakes feature a unique drive system which comprises oil-immersed pinion and crown wheels.
  • The fully enclosed design ensures full and permanent lubrication, and makes the entire system absolutely maintenance-free.
  • The hardened cam track is adjustable, and features a flat curve and an extremely large 400mm diameter, providing positive guidance to the steel rollers, and promoting quiet machine running.
  • Aluminium bearing housings, with two integral ball bearings and wide support, provide solid and maintenance-free tine arm mounting.
Kverneland 9000 Series ProLine Rotor
Fully enclosed design ensures full and permanent lubrication.
Fully enclosed design ensures full and permanent lubrication.
Fully enclosed design ensures full and permanent lubrication.
Oil-immersed crown wheel and pinion reduces wear to a minimum.
Oil-immersed crown wheel and pinion reduces wear to a minimum.
Oil-immersed crown wheel and pinion reduces wear to a minimum.
Injection moulded aluminium tine arm support housings.
Injection moulded aluminium tine arm support housings.
Injection moulded aluminium tine arm support housings.

Maneuverability

  • The rear carrier frame with controlled steering facility allows tight turns on headlands and loss free swathing, even in awkwardly shaped fields.
  • Even if the rotors are lifted on a steep slope, the steering system reliably counteracts any deviation.
  • The ability to make sharp turns up to 80° and the cross stabilizer in the headstock are unique Kverneland features.
KvT_9584C_0006.jpg
Active wheel steering for sharp turns.
Active wheel steering for sharp turns.
Active wheel steering for sharp turns.
Maneuverability
Maneuverability
Outstanding ground clearance in headland position.
Outstanding ground clearance in headland position.
Outstanding ground clearance in headland position.

TerraLink Quattro

  • Kverneland rotary rakes are designed to do well-shaped and clean swaths, achieved by precision in every part of the raking.
  • The ground contour following ability is important to avoid dirt in the swath - especially in uneven field conditions.
  • The TerraLink Quattro system controls the rotor in 3 dimensions, with a unique combination of an undercarriage with 4 wheels and a specially designed rotor suspension system. This ensures superb raking performance, even at higher forward speeds.
  • Maintenance-free system - no pivots or joints to wear out.
  • Automatic rotor suspension, ensuring smooth operation.
  • Built-in pressure bias on front wheels prevents lifting and tine bounce.
  • Optimum ground following for clean raking at high forward speeds. All wheels are positioned close to the tines.
TERRALINK_QUATTRO
TerraLink Quattro is a maintenance-free system
TerraLink Quattro is a maintenance-free system
TerraLink Quattro is a maintenance-free system
No pivots or joints to wear out.
No pivots or joints to wear out.
No pivots or joints to wear out.
Undercarriage with 4 wheels.
Undercarriage with 4 wheels.
Undercarriage with 4 wheels.

Hydraulically Adjustable Working Width

  • The Kverneland centre swath rakes offer hydraulic adjustable working width.
  • This enables varying swath width, ensuring a perfect match to the pick-up width of loader wagons, balers and foragers.
  Working Width Swath Width
9472 C 6.20 - 7.20m 1.20 - 2.20m
9476 C 7.00 - 7.80m 1.20 - 2.20m
9580 C 7.00 - 8.00m 1.20 - 2.20m
9584 C 7.60 - 8.40m 1.30 - 2.10m
9590 C Hydro 8.00 - 9.00m 1.20 - 2.20m
95110 C 9.30 - 11.00m 1.40 - 3.10m
KV_9472 C_0011.jpg
Narrow swath ...
Narrow swath ...
Narrow swath ...
..,. or wide swath
..,. or wide swath
..,. or wide swath