Kverneland 4132 L - 4140 L

A User-Friendly Trailed Pull-Type Disc Mower

The all-new Kverneland 4132 L and 4140 L are easy to operate and have a low power requirement which reduces the fuel consumption and therefore allow the mowers to be used with smaller tractors. Based on a responsive floatation system these mowers have a remarkable ability to adapt to the ground structure which improves the grass flow and provides a gentler handling of the crop. It also protects the cutterbar from unforesseen obstacles which may occur. Kverneland  4132 L and 4140 L have a sideward adaption which allows a movement up and down of 8.5° to each side – in total 17°.

The Advantages:

  • Working width: 3.16m and 3.92m
  • Responsive Floatation ensures an even pressure across the entire cutterbar in uneven conditions
  • Easy to connect to every tractor
  • Outstanding ground following ability
  • Fully welded cutterbar with round discs

Technical Specifications:

  Working Width Weight Power Req., Min
4132 L 3.16m 1220kg 48/65 kW/hp
4140 L 3.92m 1340kg 63/85 kW/hp
KV_4132L_001
Video
Animation
Kverneland 4132 L - 4140 L
Kverneland 4132 L - 4140 L
Kverneland 4132 L - 4140 L
Kverneland 4132 L - 4140 L


Responsive Floatation

  • Exceptional ability to adapt to the ground conditions
  • Ensures an even pressure across the entire cutterbar in uneven conditions
  • The range is 350mm (1’2”) upwards and 235mm (9”) downwards
Kv 4100 007
Responsive Floatation
Responsive Floatation

Sideward Adaption

 

  • Sideward adaption which allows a movement up and down of 8.5° to each side – in total 17°
  • Generates many benefits when working on hillsides or along ditches, and also makes it easier to control the unit on headlands
Kv 4100 004.jpg

Swivel Hitch Gearbox

  • The gearbox is fixed to the mainframe in order to ensure less movement during operation
  • Provides unlimited rotational movement between the machine and the tractor
  • Makes it easier to perform sharp turns
KV 4132 L - 4140 L 001

Cutterbar with Round Discs

  • Kverneland uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
  • Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
  • The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
  • The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
  • The fully welded cutterbar gives a very stiff and strong design for high durability.
  • With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.
KvT_2600_0013.jpg
Low noice cutterbar thanks to specially tooled gear wheels.
Low noice cutterbar thanks to specially tooled gear wheels.
Low noice cutterbar thanks to specially tooled gear wheels.
Fully welded cutterbar with overlapping C-profiles
Fully welded cutterbar with overlapping C-profiles
Fully welded cutterbar with overlapping C-profiles
Round discs will immidiately reject foreign obstacles.
Round discs will immidiately reject foreign obstacles.
Round discs will immidiately reject foreign obstacles.
ProFit quick change of knives.
ProFit quick change of knives.
ProFit quick change of knives.