Kverneland 11070 C/CD - 11080 C/CD

Dual Purpose Rotor Loader Wagons

The dual-purpose wagon takes capacity to a new dimension with its loading capacity of more than 80m³. The 11070 C/CD and 11080 C/CD offer a high number of features like the new Innovative MaxiFlow pick-up system with hydraulic driveline, ISOBUS control system, spring loaded boogie axles and largely dimensioned chain-and-slat conveyor for fast and efficient unloading.

The Advantages:

  • MaxiFlow pick-up without cam track for low wear and smooth operation.
  • New hydraulic driveline of the pick-up with pivoting centre suspension.
  • 25mm wide input tines ensure efficient crop flow.
  • High capacity intake rotor with 800mm diameter rotor.
  • Pre-chopping system with 40 knives.
  • Easy maintenance - the complete knife unit is swung out for easy access.
  • ISOBUS Control.
  • Spring loaded bogie axles.
  • Largely dimensioned chain-and-slat conveyor for fast and efficient unloading.

Technical Specifications:

  Load Capacity to DIN
(extended tailgate)
Load Capacity medium Compression
(extended tailgate)
Max weight
11070 C 34.8m³ 39.6m³ 24000kg
11070 CD 34m³ (36.4) 68m³ (72.8) 24000kg
11080 C 40.1m³ 80.2m³ 24000kg
11080 CD 39.3m³ (41.7) 78.6m³ (83.4) 24000kg

 

KV 11080 C 0001.jpg
Video
Animation
Kverneland 11070 C/CD - 11080 C/CD
Kverneland 11070 C/CD - 11080 C/CD
Kverneland 11070 C/CD - 11080 C/CD
Kverneland 11070 C/CD - 11080 C/CD
Kverneland 11070 C/CD - 11080 C/CD
Kverneland 11070 C/CD - 11080 C/CD
Kverneland 11070 C/CD - 11080 C/CD
Kverneland 11070 C/CD - 11080 C/CD


MaxiFlow Pick-Up

  • The MaxiFlow pick-up features a hydraulic driveline mounted onto the pick-up, without the need for the traditional gearbox and chain drive that limits the flexibility in ground adaptations
  • The hydraulic driveline of the pick-up reduced power requirement by up to 15% compared to the traditional gearbox and chain drivelines.
  • The hydraulic driveline features a centre pivot suspension of the entire pick-up unit that offers transverse adaptation of +/- 100mm on each side of the pick-up unit.
  • The 2m MaxiFlow pick-up is without cam tracks. The uncontrolled pick-up unit gives less wear compared to a pick-up with cam track steering.
  • The MaxiFlow intake system uses staggered tines on the pick-up, operation in combination with the roller crop press, to deliver a uniform flow of material across the full width of the chopping rotor.
  • Should a blockage occur in the intake system, the new hydraulic driveline allows the  possibility to reverse the pick-up to clear blockages in seconds from the tractor seat.
  • A pressure control valve inside the hydraulic driveline protects the entire pick-up unit from overload and damage, in case of the intake system struggling in heavy crop conditions or  when hitting a foreign obstacle.
  • Intake speed of the pick-up can be adjusted from the tractor seat, allowing the operator to customize speed to current swath size and forward driving speed.
VI_Rotex Combi 800 0009
Centre pivot suspension
Centre pivot suspension
Centre pivot suspension
roller crop press is standard
roller crop press is standard
roller crop press is standard
Hydraulic driveline of the pick-up
Hydraulic driveline of the pick-up
Hydraulic driveline of the pick-up

Strong Rotor Design

  • 25mm wide input tines ensure efficient crop flow with a minimum of power requirements.
  • High capacity intake with 800mm diameter rotor.
  • Pre-chopping system with 40 knives.
  • Theoretical chopping lengths of 38mm.
  • Individual spring protection of the knives.
  • The large 800mm diameter rotor is driven by the maintenance-free oil immersed gearbox that ensures trouble-free operation
  • Easy maintenance – the complete knife unit is swung out for easy access.
  • The complete knife unit is easy accessible for daily inspection and maintenance. The chopping unit is simple lowered and swung out.
  • The knives are quickly released without the use of tools.
  • The 25mm wide input tines, arranged in a chevron pattern, move the crop efficiently towards the cutting knives without friction or crop loss.
VI_Rotex Combi 800 0007.jpg
25mm input tines
25mm input tines
25mm input tines
800mm diameter rotor
800mm diameter rotor
800mm diameter rotor
Knives are quickly released
Knives are quickly released
Knives are quickly released
Oil-immersed gearbox.
Oil-immersed gearbox.
Oil-immersed gearbox.

Boogie Axles

  • The new 11000 series is fitted with a four tonnes hydraulically articulated drawbar designed to bear even the heaviest loads when working with both grass silage and maize
  • The strong and very stable tandem axle offers smooth operation and is designed for safe and fast transport of the crop to the silage clamp or when working off-road in the field.
  • The 11000 series is fitted with parabolic spring loaded boogie axles. The asymmetric mounted springs and wide distance of the suspension ensures that both axles are balanced at any time.
  • This provides even weight distribution with load evenly distributed on all 4 wheels. This makes the 11000 series easier to pull, and reduces soil compaction and tyre wear when operating in the field.
  • The standard level of specification comprises a hydraulic brake system and XXL 700/50R 26.5 tyres, but will accept tyres up to 800mm wide, which significantly reduces ground pressure.
  • The 11000 series is standard fitted with steered wheels, improving manoeuvrability when space is limited. 
KV 11080C_0002.jpg
Large XXL wheels 700/50R 26.5
Large XXL wheels 700/50R 26.5
Large XXL wheels 700/50R 26.5
Steered wheels
Steered wheels
Steered wheels
hydraulic articulated drawbar
hydraulic articulated drawbar
hydraulic articulated drawbar
Parabolic spring loaded tandem axles
Parabolic spring loaded tandem axles
Parabolic spring loaded tandem axles

Fast Unloading

  • The large dimensioned hydraulic chain-and-slat conveyor is split into two segments and features four heavy duty chains designed to bear even the heaviest of loads.
  • The scraper floor automatically disengages when the chamber is full.
  • Loading and unloading speed is infinitely adjustable and sensors warn via the control box when the chamber is full.
  • The 11000 series offers very fast and efficient unloading of the material. The large tailgate in combination with the adjustable speed of the chain-and-slat conveyor provides very fast unloading of the material so no time is lost.
  • The sensor controlled tailgate is operated hydraulically. The tailgate is mechanically closed and is monitored by two sensors, showing the position on the control terminal.
  • The 11000 series is fitted with three large diameter discharge rollers, which are driven by maintenance friendly driveshaft, to unload the material in a uniform and even mat, reducing the need for evening out the clamp afterwards.
  • The 11000 series features heavy duty side walls made of galvanised powder painted steel plates. The vertical side plates move the material to the rear of the chamber, ensuring a full load.
KV 11080C_0005.jpg
Front wall can be folded hydraulically
Front wall can be folded hydraulically
Front wall can be folded hydraulically
Fast Unloading
Fast Unloading
heavy-duty chain-and-slat conveyor
heavy-duty chain-and-slat conveyor
heavy-duty chain-and-slat conveyor


iM FARMING


ISOBUS

When deciding what equipment to purchase, it is not always easy to find the optimal solution in the broad market offering of today. Technology is developing fast and tractors and implements are more and more equipped with high tech electronics. We understand this complexity and are committed to provide you with easy farming solutions. Therefore these cost-efficient ISOBUS Universal Terminals, IsoMatch Tellus and IsoMatch Tellus GO are made for easy machine control and efficient farming.

More about ISOBUS Universal Terminals >

IM_isomatch-tellus_0023

IsoMatch Tellus

One terminal to control all ISOBUS machines

Using ISOBUS as the interface, the IsoMatch Tellus can communicate with all ISOBUS machines and is equipped to drive with GPS systems.
The easy-to-use touch screen is designed for long working days. You have an excellent view of the two screens, which allows you to follow the performance of both the implement and the tractor.

More about IsoMatch Tellus >

IMTellusLoaderWagon

IsoMatch Tellus GO

Work easy. Be in control.

Tellus GO is especially developed for controlling the machine in a simple way. The farmer is in full control of the machine in exactly the way he wants. Easy set up the machine with the soft keys via the 7-inch touch screen. And, optimal control while driving, just use the hard keys and rotary switch. Controlling the implement has never been so easy.

This can be you your first step into Precision Farming
IsoMatch Tellus GO makes it easy to control any ISOBUS machine from your tractor cab. IsoMatch GEOcontrol enables you to achieve higher yields, lower costs and do your work with less hassle. This licence key is divided in two parts, Section Control and Variable Rate Control, which are  available from the IsoMatch Shop. Now you can buy the specific functionality that you need.

More about IsoMatch Tellus GO >

TellusGO_Loaderwagon1
IsoMatch Tellus GO
IsoMatch Tellus GO
IsoMatch Tellus GO
IsoMatch Tellus GO

IsoMatch Eye

The IsoMatch Eye is the camera option in the IsoMatch product range.

IsoMatch Eye is a camera that has been developed for use with our sophisticated IsoMatch Tellus and IsoMatch Tellus GO dual screen terminal. The IsoMatch Eye is switchable from rear view to standard view.
It gives you full control and overview of entire machine operation during day and night, because of its night vision by integrated LED’s. This increases the safety e.g. when reversing the machine or manoeuvring around obstructions.

SMART
Changeable from rear view to standard view

EFFICIENT
Full control and overview of entire machine operation

EASY
Night vision by integrated LED’s

IsoMatch-Eye_500

IsoMatch InDemo

Our compact solution to demonstrate the compatibility of ISOBUS machines wherever you are

ISOBUS is all about compatibility. Whether you would like to show a customer your machines' compatibility to their ISOBUS tractor or demonstrate functionality on the IsoMatch Tellus, the IsoMatch InDemo is the perfect solution. The IsoMatch InDemo has won a silver medal of innovation at Agritechnica 2013.

Just plug and play
Plug the IsoMatch InDemo plug into the tractor's ISOBUS connector and you are ready. Every IsoMatch InDemo plug is programmed with a particular machine software. The virtual terminal functions as if the plug was a real machine. This compact solution is applicable to any ISOBUS tractor type.

More about IsoMatch InDemo >

IsoMatch-InDemo_500
IsoMatch InDemo
IsoMatch InDemo