Kverneland 6716 - 6720

Kverneland 6716 - 6720 - The new industry leaders in bale density. This is achieved through Intelligent Density 3D, a system which allows you to choose the bale density best suited to your crop conditions. You can even bale up to 2 metres in diameter. The performance and versatility of the 6700 series improves efficiency and lowers your costs.

The Advantages:

  • Intelligent Density 3D with new easy setting of bale density - pre-selectable from the tractor cab.
  • PowerBind with direct net injection for fast and highly reliable netting.
  • Easy and simple loading of net roll.
  • ISOBUS control
  • 2.2 m pick-up with small diameter.
  • PowerFeed rotor intake for impressive intake capacity.
  • SuperCut-14 and 25 knife rotors for efficient cutting and tight bales.
  • DropFloor for easy unblocking.
  • 3 different core densities, pre-selectable from the tractor cab.

 

Technical Specifications

  Bale diameter Intake System Binding
6716 R 1.2x 0.6-1.65m PowerFeed Twine, net, double
6716 SC-14 1.2x 0.6-1.65m SuperCut-14 knives Net, double
6716 SC-25 1.2x 0.6-1.65m SuperCut-25 knives Net
6720 R 1.2x 0.6-2.00m PowerFeed Twine, net, double
6720 SC-14 1.2x 0.6-2.00m SuperCut-14 knives Net, double
6720 SC-25 1.2x 0.6-2.00m SuperCut-25 knives Net
KV_6716_006
Video
Animation
Kverneland 6716 - 6720
Kverneland 6716 - 6720
Kverneland 6716 - 6720
Kverneland 6716 - 6720
Kverneland 6716 - 6720
Kverneland 6716 - 6720
Kverneland 6716 - 6720
Kverneland 6716 - 6720


PowerBind Net Wrap

  • One of the fastest net wrap actions available. This means minimum downtime and maximum time baling.
  • The net is fed directly into the bale chamber by an injection arm in a flat movement angle to keep the net tight at all times.
  • Accurate and extremely reliable net injection.
  • No interference from external factors such as wind and crop.
  • when the bale is 90% complete the injection arm moves forward, ready for the net injection. No time is spent picking up the net. In fact
  • Very low loading height, for maximum convenience and time saving. To replace the empty roll just swing out the shaft and replace it with a new roll
  • The PowerBind net wrap system allows the net to extend past the edge of the bale.
PowerBind Net Wrap system
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap

Intelligent Density 3D

  • Setting and selection of correct bale density is vital in order to the get right quality of the bale. Especially when the baler is utilized through the full season in different crops like straw, hay and silage it is important to adjust the bale density to specific type of material.
  • Intelligent Density 3D with 3 pre-selected bale density settings making it very easy to choose the correct bale density in different crops.
  • It is however still possible to customize the bale density in 3 separate zones each with a choice of diameter and pressure to match specific request.
  • With the new Intelligent Density 3D application three pre-configured bale densities are available from the menu of the control box, each of them tailored for straw, hay or silage. This makes the change-over from different crop material much easier limiting the risk of mistakes.
  • Baling dry straw and want the heaviest bales possible? Maximum pressure is set in every zone.
  • Baling hay? Soft centre core to let the bale breath is set, with gradually increasing pressure towards the outer layer.
  • Baling wet silage? Pressure is reduced in the centre and mid zones.
rv5200 bale cham
As the bale grows, the belt tensioning arm ...
As the bale grows, the belt tensioning arm ...
As the bale grows, the belt tensioning arm ...
...  is subjected to steadily increasing resistance
... is subjected to steadily increasing resistance
...  is subjected to steadily increasing resistance
Three separate zones each with a choice of diameter and pressure
Three separate zones each with a choice of diameter and pressure
Three separate zones each with a choice of diameter and pressure
The two front rollers with self-cleaning scrapers are designed to work well in silage
The two front rollers with self-cleaning scrapers are designed to work well in silage
The two front rollers with self-cleaning scrapers are designed to work well in silage

ISOBUS Control

IsoMatch Tellus Terminal

  • The IsoMatch Tellus is the new virtual terminal, offering 2 Interface screens in 1 terminal. The large 12” easily programmable touch screen offers ergonomic use and is designed for long days of operation.
  • Due to the increasing number of functionalities that can be added to a machine such as cameras, the operator can use the baler interface in the top screen and a camera display in the bottom screen, to monitor finished bales.
  • Another possibility is to use the baler interface in the top screen and the tractor interface screen at the bottom.

IsoMatch Tellus GO Terminal

  • IsoMatch Tellus Go is a full Isobus terminal able to control all Isobus machines in a very simple way.
  • Compact design makes it easy to integrate in the tractor cab despite the comfortable 7" touch screen allowing perfect machine set-up and control. With hard keys combined with the rotary switch on right hand side, for direct access to main functions while driving. 

The Focus 3 Control Terminal

Kverneland Group Mechatronics has recently launched a new operator terminal, the Focus 3. This terminal is developed for specific implement types and will only be delivered as package for those implements, together with the electronics for balers. The terminal Focus 3 is positioned in the market as an economy solution.

  • The Focus 3 terminal is easy to learn and very intuitive, with focus on functionality and operating simplicity. The Focus 3 terminal is a universal control terminal which can also be used with other implements from Kverneland Group.
  • The Focus 3 terminal gives you full control of all functions from the tractor cab. They are shown on a large and very clear digital display. The Focus 3 terminal monitors and controls all necessary functions with all relevant parameters / information visible at a glance. The control box is also driving the binding automatically without any intervention from the operator.
VI_RV5200_0015_kvg_large
IsoMatch Tellus can be used with other ISOBUS implements.
IsoMatch Tellus can be used with other ISOBUS implements.
IsoMatch Tellus can be used with other ISOBUS implements.
ISOBUS - Get connected.
ISOBUS - Get connected.
ISOBUS - Get connected.
ISOBUS Control
ISOBUS Control
ISOBUS Control
ISOBUS Control

2.2m Wide Pick-Up

  • 2.2m pick-up with small diameter pick-up reel for fast and efficient throughput.
  • Pick-up with 5 rows of tines
  • Twin cam tracks.
  • Tine bars with two central supports.
  • Small diameter pick-up design.
  • Roller crop press is standard.
  • Narrow transport width – no need to remove the pick-up wheels for transport.
KV_6720_007
2.2m Wide Pick-Up
2.2m Wide Pick-Up
2.2m Wide Pick-Up
2.2m Wide Pick-Up

Intake Rotor

SuperCut-14

  • The SuperCut-14 knife chopping system provides a fast and efficient flow into the baler. With a chopping length of 70 mm it is the ideal solution for producing tight bales with superb silage quality.
  • Each individual knife is spring protected against foreign obstacles. The knife will immediately return to working position once the obstacle has passed.

SuperCut-25

  • The SuperCut-25 pre-chopping system offers the ultimate solution for short chop baling with a chop length of 40mm. The short and precise chop provides dense and airtight bales for the best possible silage quality.
  • The operator can choose to engage 25, 13, 12, 6 or 0 knives, giving maximum flexibility of operation.
  • The SuperCut- 25 knives are fitted with dual action protection against foreign objects. Each knife is individually spring protected and can move in two directions

PowerFeed Rotor Intake

  • Truly impressive intake capacity can be achieved with the PowerFeed rotor intake system - handling all crop types with ease, whatever the conditions.
  • The PowerFeed rotor with its 13 rotor fi ngers proactively forces the material into the bale chamber for higher intake speed and capacity proving instant bale start.
SuperCut-25 knife
SuperCut14
SuperCut14
SuperCut14
SuperCut-14
SuperCut-14
SuperCut-14
SuperCut-14
SuperCut-14
SuperCut-14
PowerFeed
PowerFeed
PowerFeed

Parallelogram DropFloor system for easy unblocking

  • Kverneland Drop Floor enables the operator to clear blockages easily from the tractor cab without any crop loss.
  • Drop the floor to free the rotor of blockage, engage the PTO to feed the blockage through and close the floor to continue baling
DropFloor


iM FARMING


ISOBUS

When deciding what equipment to purchase, it is not always easy to find the optimal solution in the broad market offering of today. Technology is developing fast and tractors and implements are more and more equipped with high tech electronics. We understand this complexity and are committed to provide you with easy farming solutions. Therefore these cost-efficient ISOBUS Universal Terminals, IsoMatch Tellus and IsoMatch Tellus GO are made for easy machine control and efficient farming.

More about ISOBUS Universal Terminals >

IM_isomatch-tellus_0023

IsoMatch Tellus

One terminal to control all ISOBUS machines

Using ISOBUS as the interface, the IsoMatch Tellus can communicate with all ISOBUS machines and is equipped to drive with GPS systems.
The easy-to-use touch screen is designed for long working days. You have an excellent view of the two screens, which allows you to follow the performance of both the implement and the tractor.

More about IsoMatch Tellus >

Tellus_field1_baler
IsoMatch Tellus
IsoMatch Tellus

IsoMatch Tellus GO

Work easy. Be in control.

Tellus GO is especially developed for controlling the machine in a simple way. The farmer is in full control of the machine in exactly the way he wants. Easy set up the machine with the soft keys via the 7-inch touch screen. And, optimal control while driving, just use the hard keys and rotary switch. Controlling the implement has never been so easy.

This can be you your first step into Precision Farming
IsoMatch Tellus GO makes it easy to control any ISOBUS machine from your tractor cab. IsoMatch GEOcontrol enables you to achieve higher yields, lower costs and do your work with less hassle. This licence key is divided in two parts, Section Control and Variable Rate Control, which are  available from the IsoMatch Shop. Now you can buy the specific functionality that you need.

More about IsoMatch Tellus GO >

TellusGO_field_Baler_closeup
IsoMatch Tellus GO
IsoMatch Tellus GO
IsoMatch Tellus GO
IsoMatch Tellus GO